ENGINE - DIESEL
REPAIRS 39 ISSUED: 09/97|
11. Raise engine. 12. Tighten timing cover upper 6 mm screws to 10 Nm. 13. Tighten timing cover upper 8 mm screw to 25 Nm. 14. Position engine mounting plate, fit and tighten bolts. 15. Clean ancillary belt tensioner pivot. 16. Position tensioner, fit washer and circlip. 17. Align tensioner, fit and tighten top bolt. Air conditioning 18. Align compressor to bracket, position threaded plate, fit bolts and tighten to 25 Nm. 19. Fit compressor support bracket bolts and tighten to 25 Nm. 20. Clean jockey pulley centre bolt, fit jockey pulley and tighten centre bolt. All models 21. Lower engine. 22. Fit crankshaft front oil seal. See this section.
|